Installing the old but legendary UT2003 (Physical Copy) on current linux systems!

Ok, so for anyone who has done this in the past when it worked with no problems, should remember how it was possible to install. The third CD of the physical UT2003 disk had a file. All you had to do was copy that file to your computer, “chmod +x“, then just run it like so “./“.

Well now days the installer will give you a few errors when trying to execute it.

1.) The first of course after copying the file from Disk 3 to your computer, is to make it excutable. so open a terminal and navigate to where you copied the file, then do the following.

chmod +x

Now if you were to just run it like so “./“, you will most likely get a error output like i am getting.

Copying to a temporary location…
Verifying archive integrity…tail: cannot open ‘+266’ for reading: No such file or directory
Error in checksums: 3981352260 is different from 3043856338

You need to export posix2 version to something else. So in your terminal do the following.

export _POSIX2_VERSION=199209

Then if you run it again, depending if you are on a 64bit version or a 32bit version, it may either load up or not. I am running Arch Linux 64bit, so i got the following error.

Copying to a temporary location…
Verifying archive integrity… All good.
Uncompressing Unreal Tournament 2003 for GNU/Linux 2107…………………………………………………………….
This installation doesn’t support glibc-2.1 on Linux / x86_64
(tried to run setup)
Fatal error, no tech support email configured in this setup
The setup program seems to have failed on x86_64/glibc-2.1

Fatal error, no tech support email configured in this setup
The program returned an error code (1)

It is complaining about my system being installed on a 64 bit version of linux, and giving me another error about glibc-2.1. So in order to get past this there are two more steps. First enter a new export to take care of the glibc2.1 problem.

export SETUP_LIBC=glibc-2.1

Then to get past the error about being on 64bit, run your installer command like so.

linux32 ./

This should bring up the installer window for UT2003, and then all you have to do is follow the steps throughout the installation process.

Also note that if you close your terminal, you will have to do your two exports again before running the installer again.

If you have any questions or issues, please let me know!

Thank you!


PS. Big thanks to Skully on steam for helping me figure this out as well!

EDIT:  Ok i was having problems with the installer being able to read the cd’s when it asked me to swap them out. So what i did was took every file from the cdrom disks and copied them into a folder on my desktop called “ut2003”, and ran the installer from in there.

In order for the installer to read all the disks from within that folder i had to do

export SETUP_CDROM=/home/chuck/Desktop/ut2003” <— Just replace the SETUP_CDROM= location to where your ut2003 files are in the folder you just created. It should work with no problems after that.

EDIT AGAIN: For a issue about not having sound for 64bit systems…. you must copy /usr/lib32/ to the system folder of the installed game, and rename it to Or make a simlink

Example of where mine is installed:

ln -s /usr/lib32/ /usr/local/games/ut2003/System/

Got a new(old) Server! Dell Poweredge 2900

So my work was cleaning out a ton of old computers. There had to be like at least 10 pentium 4 desktops with like 256mb ram. A few Celeron desktops with like a gig of ram, but the company president came up to me and asked me if i wanted a few of the old servers. I was like “YES!”. So i went in the back, and he had these two HUGE, heavy ass servers. One was a Dell Poweredge 2600 (Doesn’t Work), and a Dell Poweredge 2900 (Currently running Peppermint OS Four under my desk).

The Dell 2600, doesn’t have any hardrives, but it does have some ancient stuff in it. It has a cd-rom / 3 1/4 inch floppy drive combo..which i though was like .. WOAH. But the thing that brings back memories is the Tape Drive, that is right underneath of it. I haven’t seen one of those in years..haha. So i think i will just use the 2600 as parts, or take it apart for something to do. Then toss it.

The Dell Poweredge 2900, works great! Although the damn thing feels like its over 100lbs. IT IS HEAVY. So here are the specs of it.

CPU/S: Two Xenon Dual Core processors @ 2.55Ghz


DVD Drive: 16X (thing is slow as hell)

Hardrives: (These things are fast)

1.) 150GB 10k RPM scuzzy

2.) 150GB 10k RPM scuzzy

3.) 150GB 10k RPM scuzzy

4.) 300GB 10k RPM scuzzy

Video Card: AMD ES1000 16mb (Pretty much just makes it possible to see the desktop)

Right now, i dont have the hard drives raided, but i am running peppermint on the 300GB, and i plan on enabling the others as standard partitions. I am currently using it for a media server, and hopefully i will start another private minecraft server, and possibly a PoP3 server.

I had heard that i could even put in a old 512mb PCI express 1.0 card (8x), and play games on it. I dont have one of those cards anymore, and i dont think i really want to buy one, just to be able to do that. Although i am sure this server could play some pretty cool games. Right now it will just be a media server to stream to my PS3 in the living room. I was actually shocked that its alot quieter than my desktop computer is..haha.

Here is a picture of it.


The Poweredge 2900 is on the left.

Just thought i would share that with you! If i ever decide to do some testing with it, i will let you know. Mostly hardware related anyway. Linux seemed to install just fine on it.

Free Keys for Fortix 2 on Steam!

Well now; a very kind developer from Nemesys Games, has sent me a few steam keys to give away on my blog! These keys are for a copy of Fortix 2. Which works on Linux! So i am here to deliver them all to you! Now this is first come first serve, and i only have this many.

I hope you enjoy this fun little game!





Don’t forget to go give them a big thank you!

My thoughts about Humble Bundle.

What is it with these humble bundles that come out one after another that only support windows.. It is starting to piss me off. Why cant they make a slider on the payment page that says “Donate money to developers to make a linux / mac port”. You know how much money they would get?? enough to build a new AAA game im sure. Would be well enough to pay for a port. I def think this should be on their page.

For my situation, and possibly for many others…all my friends get these games, play the hell out of em, and get board by the time i get a linux version. That is if they even eventually get a Linux version of a game seen on Humble Bundle. Of course i could just stop complaining and shackle myself down to a Windoze OS..but that is a sign of weakness. We will win this battle..we just have to keep fighting.

Sorry..i am just venting.


Been So Busy!! Im sorry :(

So guys, i am still alive and around. I haven’t forgotten about you, or the blog. I have just picked up another job. So i have been currently working Mon-Fri… 6:30 AM – 3:00PM at my first job, and then 4:30PM – 8:30PM (Sometimes to Midnight). I hardly get a chance to get on my computer. I usually just go straight to bed cause i am so exhausted. I just wanted to let you know what has been going on with me. This second job is greatly helping me out. I went from not having any money after bills, to about 300 dollars a week as spending cash. Its been alot of hard work, but its worth it. I will try my best to post some more Linux Fix it’s when i can. For now, hang in there guys, and thank you so much for supporting my blog by linking it to other sites. The more people we can help the better!



Enabling nvidia-prime on Linux Mint 15.

So i was reading a article about how to enable your nvidia card full time without having to use bumblebee in Linux. So on my Laptop running Linux Mint 15 Cinnamon Edition 64bit, i had started following the steps on this page. Ubuntu Pastebin.

Not everything on this walkthrough was installing, but i did figure out how to get it work.

Here is what i did to make my Nvidia card run full time on my laptop.


1.) Follow the steps through the walkthrough, all the way until you get to “sudo make install” of xrandr 1.4

The creation for the xorg.conf file didn’t work out for me, so i just deleted it. Also, the .xsessionrc didn’t work either. The desktop wouldn’t load, and i just got a black screen.

2.) I then did the section where it says,

sudo add-apt-repository ppa:canonical-x/x-staging

sudo add-apt-repository ppa:xorg-edgers/ppa

sudo apt-get update && sudo apt-get upgrade

sudo apt-get install nvidia-319

Ok so note that it says nvidia-319. It does install it, but it also installs nvidia-325. When you run nvidia-settings, it actually shows version 325.15 running as your graphics driver.

3.) I skipped the part where it has you install xorg-server 1.14, but i did install the libudev0 file.

4.) I skipped down to the virtualgl section and installed that.

5.) I then grabbed nvidia-prime from here

Ok so when you install nvidia-prime, it is going to ask you to install lightdm, and a few other things as well. I am not sure if it requires you to use lightdm as your login manager, but i chose to use it anyway. So my login on Mint looks like ubuntu’s login

6.) Reboot your computer.

Now i cant say this will work for everyone. It just worked for me. I was able to start up games / nvidia-settings without “optirun” or “primusrun”! I am very happy.

Just follow these carefully. You can always purge files if you have a error and need to go back to before this attempt.

Good Luck!

PS: you can read more about nvidia-prime enabling in Ubuntu 13.10 as well. Here





How to make steam iconify after closing the window (ubuntu)

So i know there is a patch for this is the arch repositories, but nothing that i could find for Ubuntu. So i will show you what to add to your “steam” startscript in “/usr/bin”. This will allow you to iconify steam when you press the x button on the window to close it, instead of it just minimizing itself to your panel.

so we need to edit “steam” in “/usr/bin”

1.) sudo gedit /usr/bin/steam

2.) when you have it open, the first few lines should look like this.

#!/usr/bin/env bash
# This is the Steam script that typically resides in /usr/bin
# It will create the Steam bootstrap if necessary and then launch steam.

# Get the full name of this script
export STEAMSCRIPT=”$(cd “${0%/*}” && echo “$PWD”)/${0##*/}”

3.) in between the top comments and where it goes to “# Get the full name of this script”, i created another line and put it in there.

4.) I put in the following.

#make steam iconify after closing the window

5.) then i saved it.

So now when you start steam from your desktop icon, or menu, or terminal command, steam will open up, and when you press the [x] in the corner of the window, you will notice that it wont be on your panel, but you will still have the steam icon near your clock and other applets.

If you want things to go back to the way they were, simply just delete that line that i added, and save it. You should be back to normal the next time you start steam.

Hope this helps anyone who wondered the same.